HOW MA80 MOTION DETECTOR ALARM WORKS

• Installed in seconds the MA80 provides a low cost but effective motion detector alarm. Once armed the PIR sensor detects movement in the protected area and triggers the alarm for auto dialing and alarm sound.

• KEYPAD, AUTO DIALER AND ALARM      With built in auto dialer for dialing up to 3 programmable telephone numbers. The MA80 can be armed and disarmed with a personal 4 digit code which is programmed into the system using the keypad. Once armed infra-red beam monitors movement up to 7 meters away at an angle of 140 degrees. If movement is detected, it will auto dial to pre-set telephone numbers and will provide alarm sounds after an entry delay 20 seconds. The siren will sound for 30 seconds then automatically reset.

• 24 HOURS HOME SECURITY    Just simply plug the telephone cable to the telephone socket and activate 24 hour stand by home security.

SPECIAL FEATURES

• Auto Dialer, up to 3 programmable telephone numbers with max 16 digits

• Stores voice message up to 6 seconds

• Can be used with PABX phone system

• Wall mounted or free standing

• No wiring – installation in seconds

• Easy to program 4-digit code

• Powerful 110dB alarm sound

• Auto reset alarm to avoid false trigger

• Exit delay 30 seconds

• Entry delay 5 seconds

• Alarm delay 20 seconds

• Battery low indicator

• Operated by 4 x AAA size battery 6V

• Detection Area: 7 meter long, 140 degree horizontal and 90 degree vertical

• Dimensions : 70mm x 163mm x 38mm (W x H x D)

MA80 IDEAL FOR:

• HOMES
• JEWELLERY SHOPS
• BANKS           
• OFFICES
• SHOPS
• FENCES